OPEN TODAY 6/15/19 CALL GREG & BOB GET REAL ADVICE
HOURLY TIMER 1-8 HR COUNTDOWN
PROGRAM TIMER 24 HR DAILY CYCLE
ONE TOUCH COUNTDOWN
SET FOR 1, 2, 4, OR 8 HOURS
SIMPLE & EASY OPERATION
Real simple. If you just want to press one button and program your MaxBlaster ozone generator to operate for between one and eight hours this countdown timer is it. Plug the timer into the wall and then plug your MaxBlaster into the timer. Make sure the on/off switch on your machine is in the on position then follow my instructions on how long to set the timer to run (either 1, 2, 4, or 8 hours). These timers are not exclusive to our machines so you've probably figured out you can save a little money buying one at your local hardware store. But if time is your concern we can save you the hassle of looking for this exact one elsewhere (these ones are not the easiest to find) and sell one direct to you.
24 HOUR PUSH PIN TIMER
MULTIPLE ON/OFF OPTIONS
REPEATS AFTER EACH DAY
If your application calls for running the ozone generator for more than 8 hours (or on a daily cycle up to 24 hours) this timer is it. It is a standard pin-type timer which allows you to decide which hours of the day you want your MaxBlaster to run. Each pin represents 15 minutes. So you can have your machine turn on/off automatically multiple times throughout the day. For example, a typical example might be someone who wants to run the ozone machine for 4 hours each day over a three day weekend without having to actually be there to turn the machine on and off. In this case you could set the timer to turn the ozone machine on each day from noon to 4pm. It would repeat each day saving you the hassle of having to control each individual cycle manually. Although they require a little more effort (and better eyesight) to program they can you a fuller arsenal of programming options unlike the hourly countdown timer.